Building More Roads - Another Quick Tutorial

This time it's some cobbled roads. Ideal for villages, but usable anywhere. The basic technique is very similar to the country roads in that the sections are made from strips of cork tile. However, these road sections are much easier to make!!

This is what they look like on the table.
Some bold Germans despatch a Centaur that was about to interrupt the officer's party at the cafe. Svine-hund!?


My regular reader ;o) may recall seeing them from reports of a recent campaign to capture Monty. Anyway, quite a few people have asked how they were made, hence this post.

As mentioned they are strips of cork tile to which I have glued some sections of printed cobble-effect card purchased from my local model shop. Make sure that the card has a good matt finish as any shine will look odd. Paint the edges of the cork a mid-grey to match the card.

Here are the sheets; enough for 8 straight sections 27cm x 9cm and four larger areas, approx 27cm x 20cm, all for about £5.

Tip - to avoid curling, use as little glue as possible to stick the card to the cork. Make sure it's a good quality glue that has minimal shrinkage. Also, it's a good idea to place a few matchsticks or a thin paintbrush under the middle of the road section (laid cobbled side up!) so that any curling is offset as it dries, resulting in a nice flat road to finish.

Happy road-building! :-)

Comments